Placeholder phone number for this city. Replace it in site.json (locationPages.huntington-beach.phone) and remove phonePlaceholder before launch.
Licensed & fully insured · 9 years in business Open Sunday to FridaySun–Fri, 6am–10pmColorado & Orange County, CA
Liberty Chimney Service Huntington Beach logo

Chimney Sweep & Repair in Huntington Beach, CA Surf City chimneys

  • Marine-layer moisture
  • Cap and damper checks
  • Waterproofing advice

Along nine and a half miles of sand, cool marine layer air settles over the roofs most spring mornings. Damp, salty conditions wear on caps, dampers and mortar, so we check those first.

100% satisfaction guaranteeYelp: People Love Us5-star Google rating100% eco-friendly
Open Sunday–Friday6:00 AM to 10:00 PM, closed Saturday
Colorado & Orange CountyLocal pages for 22 cities across both regions
Chimney and fireplaceSweep, inspect, repair, cap, line and rebuild
Licensed & fully insuredNine years in business serving homeowners

Customer reviews

What customers say

See what customers say about Liberty Chimney Service on Google.

Customer reviews live on our Google listing, where anyone can read them and add their own.

Read our Google reviews

Beachside living

Close to the coast, close to the weather

Huntington Beach sits about 35 miles from Downtown Los Angeles and stretches along the shore, from the pier area through Huntington Harbour. Roughly 60 percent of its housing was owner-occupied at the last census cited, so many fireplaces belong to long-term residents who have watched their stacks weather.

Fog and overcast, mostly in May and June, keep masonry damp longer than in inland cities. That slows drying, encourages efflorescence and rusts exposed steel. A breathable water-repellent treatment can help, but cracks must be repaired first.

Request a visit
Tall brick chimney with a cap rising above a residential street
Stone chimney with a copper-colored cap and flashing on a shingle roof

What we look for

Moisture first, then everything else everything else

Where air stays damp, water is usually the root cause. We trace staining, rust and soft mortar to the point of entry and then describe your options in order of importance.

  • Water-entry tracing
  • Metal part condition
  • Open Sunday to Friday

How a visit works

Three steps from phone call to finished work

  1. 01

    Tell us what you see

    Call or use the form. Smoke smells, water stains, loose brick or a missing cap are all useful details.

  2. 02

    A technician looks it over

    The chimney, flue and fireplace are checked, and what you find is explained in plain terms before anything is decided.

  3. 03

    Choose the work

    Sweeping, a small repair or a bigger rebuild: you pick the next step with the findings in hand.

Weather

Overcast mornings, dry afternoons, winter storms all test the brick

Summers here rarely top 85 degrees and winters rarely fall below 40, with about 14 inches of rain in mid-winter. That gentle range protects brick from freezing damage, but it does not protect steel from salty dampness.

Check the cap and the flashing after foggy weeks. Surface rust flakes, white powder on the brick or a musty smell at the hearth tell you moisture is getting in. A replacement chimney cap is often the simple first step.

  • Musty hearth smell
  • White powder on brick
  • Rusting cap or damper
  • Water marks on chimney wall
Read about inspections
Brush clearing the inside of a stovepipe

Local reach

From Downtown to the harbour

We take calls from Downtown near the pier, the Huntington Harbour waterways, homes near the Bolsa Chica wetlands and neighborhoods inland toward Fountain Valley, plus neighboring Costa Mesa and Newport Beach.

5 listed service areas. marks a shop location. Call to confirm availability for your address.

Photos

Chimney work in pictures

Gallery of work
Chimney sweep cleaning a chimney from the roof
Chimney sweeping
Technician repairing chimney brickwork
Masonry & tuckpointing
Metal chimney cap installed on a chimney
Caps
Technician servicing a wood stove
Fireplaces & stoves
Finished fireplace in a living room
Fireplaces & stoves
Chimney and flue inspection
Inspection
Technician working on chimney masonry and crown
Crowns
Sealing chimney and vent flashing on a roof
Flashing & sealing

FAQ

Huntington Beach chimney questions

Short replies to what people ask before they call. The full list is on the FAQ page.

Talk to a technicianOpen Sunday to FridaySun–Fri, 6:00 AM – 10:00 PM(714) 622-7523See all questions →
How does the marine layer affect a chimney?

The marine layer keeps air damp and cool, mostly in late spring. Masonry dries more slowly and metal parts rust sooner. Annual checks of the cap, damper and mortar joints catch the early signs.

Is waterproofing worth it near the beach?

It can be, if the masonry is sound. Sealing over open cracks traps moisture, so crown and joint repairs come first. After that, a vapor-permeable treatment may reduce absorption.

Can salt air ruin a chimney cap?

Over time, yes. Cheap or thin metal rusts quickly near the coast. When a cap needs replacing, ask about the material and the finish so it holds up to damp, salty air.

Do Huntington Harbour homes have any special access issues?

Some lots are tight and some roofs are steep or tile. Describe the house at booking, and the technician will work out a safe route to the stack.

How soon should I get a chimney inspection after moving to Surf City?

Before the first fire. An inspection under NFPA 211 guidelines tells you whether the flue, damper and firebox are ready, and a sweep can follow if needed.

Ready to have your chimney looked at?

Call during open hours or send the form, and we will arrange a visit.

Call now Free quote